UniformMPS
full name: tenpy.networks.uniform_mps.UniformMPS
parent module:
tenpy.networks.uniform_mps
type: class
Inheritance Diagram
Methods



Return an MPS which represents 
Apply signs on a virtual MPS leg equivalent to a JordanWigner string on the left. 


Apply a local (one or multisite) operator to self. 

Similar as 

Apply a (global) product of local onsite operators to self. 

Return the average charge for the block on the left of a given bond. 

Bring self into canonical 'B' form, (re)calculate singular values; in place. 
Bring a finite (or segment) MPS into canonical form; in place. 



Bring an infinite MPS into canonical form; in place. 

Convert infinite MPS to canonical form; in place. 


Return the charge variance on the left of a given bond. 

Compress an MPS. 

Compress self with a single sweep of SVDs; in place. 

Compute the momentum quantum numbers of the entanglement spectrum for 2D states. 

Transform self into different canonical form (by scaling the legs with singular values). 
Returns a copy of self. 


Correlation function 

Calculate the correlation length by diagonalizing the transfer matrix. 
Return possible charge_sector argument for 


Artificially enlarge the bond dimension by the specified extra legs/charges. 

Repeat the unit cell for infinite uniform MPS boundary conditions; in place. 

Calculate the (halfchain) entanglement entropy for all nontrivial bonds. 
Calculate entanglement entropy for general geometry of the bipartition. 

Calculate entanglement entropy for general geometry of the bipartition. 


return entanglement energy spectrum. 

Expectation value 
Expectation value 


Expectation value 

Calculate expectation values for a bunch of terms and sum them up. 

Extract an enlarged segment from an initially smaller segment MPS. 

Extract an segment from a finite or infinite MPS. 

Construct a matrix product state from a set of numpy arrays and singular vals. 

Convert an infinite MPS to a uniform MPS. 
Construct a matrix product state with given bond dimensions from random matrices (no charge conservation). 


Construct an MPS from a single tensor psi with one leg per physical site. 

Load instance from a HDF5 file. 

Construct an MPS from a product state given in lattice coordinates. 

Create an MPS as a product of (many) local mps covering all sites to be created. 

Construct a matrix product state from a given product state. 
Construct a matrix product state by evolving a product state with random unitaries. 


Create an MPS of entangled singlets. 

Gauge the legcharges of the virtual bonds s.t. 

Return (view of) AC at site i in canonical form. 

Return (view of) AL at site i in canonical form. 

Return (view of) AR at site i in canonical form. 

Return (view of) B at site i in canonical form. 

Return center matrix C on the left of site i 
Return singular values on the left of site i 

Return singular values on the right of site i 

Construct the chargetree for a given charge sector. 


Like 

Given a list of operators, select the one corresponding to site i. 

Return reduced density matrix for a segment. 

Calculates the nsite wavefunction on 

Calculate and return the qtotal of the whole MPS (when contracted). 

Modify self inplace to group sites. 

Modify self inplace to split previously grouped sites. 

Calculate the twosite mutual information \(I(i:j)\). 

Check that self is in canonical form. 
Return the virtual legs on the left and right of the MPS. 


Compute overlap 

Contract 

Applies the permutation perm to the state; in place. 

Locally perturb the state a little bit; in place. 
Return probabilities of charge value on the left of a given bond. 


Generates an MPS from a product state list which is projected onto a given charge sector. 

Shift the section we define as unit cell of an infinite MPS; in place. 

Sample measurement results in the computational basis. 

Export self into a HDF5 file. 

Set AC at site i 

Set AL at site i 

Set AR at site i 

Set tensor B at site i. 

Set C left of site i 

Set singular values on the left of site i 

Set singular values on the right of site i 

SVD a twosite wave function theta and save it in self. 
Perform a spatial inversion along the MPS. 


Swap the two neighboring sites i and i+1; in place. 
Correlation function between (multisite) terms, moving the left term, fix right term. 

Correlation function between (multisite) terms, moving the right term, fix left term. 

Correlation function between sums of multisite terms, moving the right sum of term. 

Sanity check, raises ValueErrors, if something is wrong. 


Check if AL C = AC and C AR = AC 

Convert UniformMPS to MPS. 

Convert a UniformMPS to diagonal gauge, i.e. where all of the bond matrices are diagonal. 
Class Attributes and Properties
Number of physical sites; for an iMPS the len of the MPS unit cell. 

Dimensions of the (nontrivial) virtual bonds. 

List of local physical dimensions. 

Distinguish MPS vs iMPS. 

Slice of the nontrivial bond indices, depending on 
 class tenpy.networks.uniform_mps.UniformMPS(sites, ALs, ARs, ACs, Cs, norm=1.0)[source]
Bases:
MPS
A Uniform Matrix Product State, only defined in the thermodynamic limit.
 Parameters:
sites (list of
Site
) – Defines the local Hilbert space for each site.ALs (list of
Array
) – The ‘leftorthonormal’ tensors of the MPS. Labels arevL, vR, p
(in any order).ARs (list of
Array
) – The ‘rightorthonormal’ tensors of the MPS. Labels arevL, vR, p
(in any order).ACs (list of
Array
) – The ‘centersite’ tensors of the MPS. Labels arevL, vR, p
(in any order).Cs (list of
Array
) – The center matrices on the left of site i, Labels arevL, vR
(in any order).
 bc
For uniform MPS only infinite bc are allowed.
 Type:
{‘infinite’}
 chinfo
The nature of the charge.
 Type:
ChargeInfo
 norm
The norm of the state, i.e.
sqrt(<psipsi>)
. Ignored for (normalized)expectation_value()
, but important foroverlap()
. Type:
 grouped
Number of sites grouped together, see
group_sites()
. Type:
 segment_boundaries
Only defined for ‘segment’ bc if
canonical_form_finite()
has been called. If defined, it contains the U_L and V_R that would be returned by that function. Type:
tuple of
Array
 (None, None)
 _AL
The ‘leftorthonormal’ tensors of the MPS. Labels are
vL, vR, p
(in any order). Type:
list of
Array
 _AR
The ‘rightorthonormal’ tensors of the MPS. Labels are
vL, vR, p
(in any order). Type:
list of
Array
 _C
The center matrices on the left of site i, Labels are
vL, vR
(in any order). Type:
list of
Array
 _valid_forms
Class attribute. Mapping for canonical forms to a tuple
(nuL, nuR)
indicating thatself._B[i] = s[i]**nuL  Gamma[i]  s[i]**nuR
is saved. Type:
 _transfermatrix_keep
How many states to keep at least when diagonalizing a
TransferMatrix
. Important if the state develops a neardegeneracy. Type:
 _p_label, _B_labels
Class attribute. _p_label defines the physical legs of the Btensors, _B_labels lists all the labels of the B tensors. Used by methods like
get_theta()
to avoid the necessity of reimplementations for derived classes like thePurification_MPS
if just the number of physical legs changed.
 test_validity(cutoff=1e08)[source]
Check if AL C = AC and C AR = AC
To have a valid MPS and take measurements, we require this to be true. This will be true after VUMPS. No measurements should actually be done on a UniformMPS; convert back to MPS.
 copy()[source]
Returns a copy of self.
The copy still shares the sites, chinfo, and LegCharges, but the values of the tensors are deeply copied.
 save_hdf5(hdf5_saver, h5gr, subpath)[source]
Export self into a HDF5 file.
This method saves all the data it needs to reconstruct self with
from_hdf5()
.Specifically, it saves
sites
,chinfo
(under these names),_AL
as"tensors_AL"
,_AR
as"tensors_AR"
,_AC
as"tensors_AC"
,_C
as"tensors_C"
, Moreover, it savesnorm
,L
,grouped
and_transfermatrix_keep
(as “transfermatrix_keep”) as HDF5 attributes, as well as the maximum ofchi
under the name “max_bond_dimension”.
 to_MPS(cutoff=1e16, check_overlap=False)[source]
Convert UniformMPS to MPS.
We return the AR matrix for each site and the DIAGONAL S matrix to the right of each site. Thus we must make sure that the C matrices are converted to diagonal matrices first.
 Parameters:
cutoff (float) – During DMRG with a mixer, S may be a matrix for which we need the inverse. This is calculated as the Penrose pseudoinverse, which uses a cutoff for the singular values.
check_overlap (bool) – Since AL C = C AR is not identically true, the MPS defined by AL and AR are not exactly the same. We can compute the overlap of the two to check.
 Returns:
psi – The rightcanonical form converted from the uniform MPS.
 Return type:
 to_diagonal_gauge(cutoff=1e16, check_overlap=False)[source]
Convert a UniformMPS to diagonal gauge, i.e. where all of the bond matrices are diagonal.
 classmethod from_hdf5(hdf5_loader, h5gr, subpath)[source]
Load instance from a HDF5 file.
This method reconstructs a class instance from the data saved with
save_hdf5()
. Parameters:
hdf5_loader (
Hdf5Loader
) – Instance of the loading engine.h5gr (
Group
) – HDF5 group which is represent the object to be constructed.subpath (str) – The name of h5gr with a
'/'
in the end.
 Returns:
obj – Newly generated class instance containing the required data.
 Return type:
cls
 classmethod from_MPS(psi)[source]
Convert an infinite MPS to a uniform MPS.
 Parameters:
psi (
MPS
) – Infinite MPS which we want to change to a uniform one. Returns:
psi – The resulting uniform MPS.
 Return type:
 classmethod from_lat_product_state(lat, p_state, **kwargs)[source]
Construct an MPS from a product state given in lattice coordinates.
This is a wrapper around
from_product_state()
. The purpose is to make the p_state argument independent of the order of the Lattice, and specify it in terms of lattice indices instead. Parameters:
lat (
Lattice
) – The underlying lattice defining the geometry and Hilbert Space.p_state (array_like of {int  str  1D array}) – Defines the product state to be represented. Should be of dimension lat.dim`+1, entries are indexed by lattice indices. Entries of the array as for the `p_state argument of
from_product_state()
. It gets tiled to the shapelat.shape
, if it is smaller.allow_incommensurate (bool) – Allow an incommensurate tiling of p_state to the full lattice. For example, if you pass
p_state=[['up'], ['down']]
with atenpy.models.lattice.Chain
, this function raises an error for an odd number of sites in the Chain, but if you set allow_incommensurate=True, it will still work and give you a state with total Sz = +1/2 for odd sites (since total Sz=0 doesn’t fit).**kwargs – Other keyword arguments as defined in
from_product_state()
. bc is set by default fromlat.bc_MPS
.
 Returns:
product_mps – An MPS representing the specified product state.
 Return type:
MPS
Examples
Let’s first consider a
Ladder
composed of aSpinHalfSite
and aFermionSite
.To initialize a state of upspins on the spin sites and halffilled fermions, you can use:
Note that the same p_state works for a finite lattice of even length, say
L=10
, as well. We then just “tile” in xdirection, i.e., repeat the specified state 5 times:You can also easily halffill a
Honeycomb
, for example with only the A sites occupied, or as stripe parallel to the xdirection (stripe_x, alternating along y axis), or as stripes parallel to the ydirection (stripe_y, alternating along x axis).
 classmethod from_product_state(sites, p_state, bc='finite', dtype=<class 'numpy.float64'>, permute=True, form='B', chargeL=None)[source]
Construct a matrix product state from a given product state.
 Parameters:
sites (list of
Site
) – The sites defining the local Hilbert space.p_state (list of {int  str  1D array}) – Defines the product state to be represented; one entry for each site of the MPS. An entry of str type is translated to an int with the help of
state_labels()
. An entry of int type represents the physical index of the state to be used. An entry which is a 1D array defines the complete wavefunction on that site; this allows to make a (local) superposition.bc ({'infinite', 'finite', 'segment'}) – MPS boundary conditions. See docstring of
MPS
.dtype (type or string) – The data type of the array entries.
permute (bool) – The
Site
might permute the local basis states if charge conservation gets enabled. If permute is True (default), we permute the given p_state locally according to each site’sperm
. The p_state entries should then always be given as if conserve=None in the Site.form ((list of) {
'B'  'A'  'C'  'G'  None
 tuple(float, float)}) – Defines the canonical form. See module docstring. A single choice holds for all of the entries.chargeL (charges) – Leg charges at bond 0, which are purely conventional.
 Returns:
product_mps – An MPS representing the specified product state.
 Return type:
MPS
Examples
Example to get a Neel state for a
TFIChain
:>>> from tenpy.networks.mps import MPS >>> L = 10 >>> M = tenpy.models.tf_ising.TFIChain({'L': L}) >>> p_state = ["up", "down"] * (L//2) # repeats entries L/2 times >>> psi = MPS.from_product_state(M.lat.mps_sites(), p_state, bc=M.lat.bc_MPS)
The meaning of the labels
"up","down"
is defined by theSite
, in this example aSpinHalfSite
.Extending the example, we can replace the spin in the center with one with arbitrary angles
theta, phi
in the bloch sphere. However, note that you can not write this bloch state (fortheta != 0, pi
) when conserving symmetries, as the two physical basis states correspond to different symmetry sectors.>>> spin = tenpy.networks.site.SpinHalfSite(conserve=None, sort_charge=False) >>> p_state = ["up", "down"] * (L//2) # repeats entries L/2 times >>> theta, phi = np.pi/4, np.pi/6 >>> bloch_sphere_state = np.array([np.cos(theta/2), np.exp(1.j*phi)*np.sin(theta/2)]) >>> p_state[L//2] = bloch_sphere_state # replace one spin in center >>> psi = MPS.from_product_state([spin]*L, p_state, bc=M.lat.bc_MPS, dtype=complex)
Note that for the more general
SpinChain
, the order of the two entries for thebloch_sphere_state
would be exactly the opposite (when we keep the the northpole of the bloch sphere being the upstate). The reason is that the SpinChain uses the generalSpinSite
, where the states are ordered ascending from'down'
to'up'
. TheSpinHalfSite
on the other hand uses the order'up', 'down'
where that the Pauli matrices look as usual.
 classmethod from_Bflat(sites, ALflat, ARflat, ACflat, Cflat, dtype=None, permute=True, legL=None)[source]
Construct a matrix product state from a set of numpy arrays and singular vals.
 Parameters:
sites (list of
Site
) – The sites defining the local Hilbert space.A{L (iterable of numpy ndarrays) – The matrices defining the MPS on each site, with legs
'p', 'vL', 'vR'
(physical, virtual left/right).R (iterable of numpy ndarrays) – The matrices defining the MPS on each site, with legs
'p', 'vL', 'vR'
(physical, virtual left/right).C}flat (iterable of numpy ndarrays) – The matrices defining the MPS on each site, with legs
'p', 'vL', 'vR'
(physical, virtual left/right).Cflat (iterable of numpy ndarrays) – The matrices defining the bond matrix on each site, with legs
'vL', 'vR'
(virtual left/right).dtype (type or string) – The data type of the array entries. Defaults to the common dtype of Bflat.
permute (bool) – The
Site
might permute the local basis states if charge conservation gets enabled. If permute is True (default), we permute the given Bflat locally according to each site’sperm
. The p_state argument should then always be given as if conserve=None in the Site.leg_L (LegCharge 
None
) – Leg charges at bond 0, which are purely conventional. IfNone
, use trivial charges.
 Returns:
mps – An MPS with the flat matrices converted to npc arrays.
 Return type:
 classmethod from_full(sites, psi, form=None, cutoff=1e16, normalize=True, bc='finite', outer_S=None)[source]
Construct an MPS from a single tensor psi with one leg per physical site.
Performs a sequence of SVDs of psi to split off the B matrices and obtain the singular values, the result will be in canonical form. Obviously, this is only welldefined for finite or segment boundary conditions.
 Parameters:
sites (list of
Site
) – The sites defining the local Hilbert space.psi (
Array
) – The full wave function to be represented as an MPS. Should have labels'p0', 'p1', ..., 'p{L1}'
. Additionally, it may have (or must have for ‘segment’ bc) the legs'vL', 'vR'
, which are trivial for ‘finite’ bc.form (
'B'  'A'  'C'  'G'  None
) – The canonical form of the resulting MPS, see module docstring.None
defaults to ‘A’ form on the first site and ‘B’ form on all following sites.cutoff (float) – Cutoff of singular values used in the SVDs.
normalize (bool) – Whether the resulting MPS should have ‘norm’ 1.
bc ('finite'  'segment') – Boundary conditions.
outer_S (None  (array, array)) – For ‘segment’ bc the singular values on the left and right of the considered segment, None for ‘finite’ boundary conditions.
 Returns:
psi_mps – MPS representation of psi, in canonical form and possibly normalized.
 Return type:
MPS
 classmethod from_singlets(site, L, pairs, up='up', down='down', lonely=[], lonely_state='up', bc='finite')[source]
Create an MPS of entangled singlets.
 Parameters:
site (
Site
) – The site defining the local Hilbert space, taken uniformly for all sites.L (int) – The number of sites.
pairs (list of (int, int)) – Pairs of sites to be entangled; the returned MPS will have a singlet for each pair in pairs. For
bc='infinite'
MPS, some indices can be outside the range [0, L) to indicate couplings across infinite MPS unit cells.up (int  str) – A singlet is defined as
(up down>  down up>)/2**0.5
,up
anddown
give state indices or labels defined on the corresponding site.down (int  str) – A singlet is defined as
(up down>  down up>)/2**0.5
,up
anddown
give state indices or labels defined on the corresponding site.lonely (list of int) – Sites which are not included into a singlet pair.
bc ({'infinite', 'finite', 'segment'}) – MPS boundary conditions. See docstring of
MPS
.
 Returns:
singlet_mps – An MPS representing singlets on the specified pairs of sites.
 Return type:
MPS
 property chi
Dimensions of the (nontrivial) virtual bonds.
 get_B(i, form='B', copy=False, cutoff=1e16, label_p=None)[source]
Return (view of) B at site i in canonical form.
 Parameters:
i (int) – Index choosing the site.
form (
'B'/'AR'  'A'/'AL'  'Th'/'AC'  None
 tuple(float, float)) – The (canonical) form of the returned B. ForNone
, return the matrix in ‘B’form.copy (bool) – Whether to return a copy even if form matches the current form.
cutoff (float) – During DMRG with a mixer, S may be a matrix for which we need the inverse. This is calculated as the Penrose pseudoinverse, which uses a cutoff for the singular values.
label_p (None  str) – Ignored by default (
None
). Otherwise replace the physical label'p'
with'p'+label_p'
. (For derived classes with more than one “physical” leg, replace all the physical leg labels accordingly.)
 Returns:
B – The MPS ‘matrix’ B at site i with leg labels
'vL', 'p', 'vR'
. May be a view of the matrix (ifcopy=False
), or a copy (if the form changed orcopy=True
). Return type:
 set_svd_theta(i, theta, trunc_par=None, update_norm=False)[source]
SVD a twosite wave function theta and save it in self.
 Parameters:
i (int) – theta is the wave function on sites i, i + 1.
theta (
Array
) – The twosite wave function with labels combined into"(vL.p0)", "(p1.vR)"
, ready for svd.trunc_par (None  dict) – Parameters for truncation, see
truncation
. IfNone
, no truncation is done.update_norm (bool) – If
True
, multiply the norm of theta intonorm
.
 get_theta(i, n=2, cutoff=1e16, formL=1.0, formR=1.0)[source]
Calculates the nsite wavefunction on
sites[i:i+n]
. Parameters:
i (int) – Site index.
n (int) – Number of sites. The result lives on
sites[i:i+n]
.cutoff (float) – During DMRG with a mixer, S may be a matrix for which we need the inverse. This is calculated as the Penrose pseudoinverse, which uses a cutoff for the singular values.
formL (float) – Exponent for the singular values to the left. (Not used for UniformMPS)
formR (float) – Exponent for the singular values to the right. (Not used for UniformMPS)
 Returns:
theta – The nsite wave function with leg labels
vL, p0, p1, .... p{n1}, vR
. In Vidal’s notation (with s=lambda, G=Gamma):theta = s**form_L G_i s G_{i+1} s ... G_{i+n1} s**form_R
. Return type:
 convert_form(new_form='B')[source]
Transform self into different canonical form (by scaling the legs with singular values).
 Parameters:
new_form ((list of) {
'B'  'A'  'C'  'G'  'Th'  None
 tuple(float, float)}) – The form the stored ‘matrices’. The table in module docstring. A single choice holds for all of the entries.
:raises ValueError : if trying to convert from a
None
form. Usecanonical_form()
instead!:
 enlarge_mps_unit_cell(factor=2)[source]
Repeat the unit cell for infinite uniform MPS boundary conditions; in place.
 Parameters:
factor (int) – The new number of sites in the unit cell will be increased from L to
factor*L
.
 roll_mps_unit_cell(shift=1)[source]
Shift the section we define as unit cell of an infinite MPS; in place.
Suppose we have a unit cell with tensors
[A, B, C, D]
(repeated on both sites). Withshift = 1
, the new unit cell will be[D, A, B, C]
, whereasshift = 1
will give[B, C, D, A]
. Parameters:
shift (int) – By how many sites to move the tensors to the right.
 spatial_inversion()[source]
Perform a spatial inversion along the MPS.
Exchanges the first with the last tensor and so on, i.e., exchange site i with site
L1  i
. This is equivalent to a mirror/reflection with the bond left of L/2 (even L) or the site (L1)/2 (odd L) as a fixpoint. For infinite MPS, the bond between MPS unit cells is another fix point.
 group_sites(n=2, grouped_sites=None)[source]
Modify self inplace to group sites.
Group each n sites together using the
GroupedSite
. This might allow to do TEBD with a Trotter decomposition, or help the convergence of DMRG (in case of too long range interactions). Parameters:
n (int) – Number of sites to be grouped together.
grouped_sites (None  list of
GroupedSite
) – The sites grouped together.
See also
group_split
Reverts the grouping.
 group_split(trunc_par=None)[source]
Modify self inplace to split previously grouped sites.
 Parameters:
trunc_par (dict) – Parameters for truncation, see
truncation
. Defaults to{'chi_max': max(self.chi)}
. Returns:
trunc_err – The error introduced by the truncation for the splitting.
 Return type:
TruncationError
See also
group_sites
Should have been used before to combine sites.
 get_grouped_mps(blocklen)[source]
Like
group_sites()
, but make a copy. Parameters:
blocklen (int) – Number of subsequent sites to be combined; n in
group_sites()
. Returns:
New MPS object with bunched sites.
 Return type:
grouped_MPS
 get_total_charge(only_physical_legs=False)[source]
Calculate and return the qtotal of the whole MPS (when contracted).
If set, the
segment_boundaries
are included (unless only_physical_legs is True). Parameters:
only_physical_legs (bool) – For
'finite'
boundary conditions, the total charge can be gauged away by changing the LegCharge of the trivial legs on the left and right of the MPS. (Not possible for UniformMPS) Returns:
qtotal – The sum of the qtotal of the individual B tensors.
 Return type:
charges
 gauge_total_charge(qtotal=None, vL_leg=None, vR_leg=None)[source]
Gauge the legcharges of the virtual bonds s.t. MPS has given qtotal; in place.
Acts in place, i.e. changes the B tensors. Make a (shallow) copy if needed.
 Parameters:
qtotal ((list of) charges) – If a single set of charges is given, it is the desired total charge of the MPS (which
get_total_charge()
will return afterwards). By default (None
), use 0 charges, unless vL_leg and vR_leg are specified, in which case we adjust the total charge to match these legs.vL_leg (None  LegCharge) – Desired new virtual leg on the very left and right. Needs to have the same block structure as the current legs, but can have shifted charge entries. For infinite MPS, we need vL_leg to be the conjugate leg of vR_leg. For segment MPS, these legs are the outermost legs, possibly including the
segment_boundaries
.vR_leg (None  LegCharge) – Desired new virtual leg on the very left and right. Needs to have the same block structure as the current legs, but can have shifted charge entries. For infinite MPS, we need vL_leg to be the conjugate leg of vR_leg. For segment MPS, these legs are the outermost legs, possibly including the
segment_boundaries
.
 entanglement_entropy(n=1, bonds=None, for_matrix_S=True)[source]
Calculate the (halfchain) entanglement entropy for all nontrivial bonds.
Consider a bipartition of the system into \(A = \{ j: j <= i_b \}\) and \(B = \{ j: j > i_b\}\) and the reduced density matrix \(\rho_A = tr_B(\rho)\). The vonNeumann entanglement entropy is defined as \(S(A, n=1) = tr(\rho_A \log(\rho_A)) = S(B, n=1)\). The generalization for
n != 1, n>0
are the Renyi entropies: \(S(A, n) = \frac{1}{1n} \log(tr(\rho_A^2)) = S(B, n=1)\)This function calculates the entropy for a cut at different bonds i, for which the the eigenvalues of the reduced density matrix \(\rho_A\) and \(\rho_B\) is given by the squared schmidt values S of the bond.
 Parameters:
n (int/float) – Selects which entropy to calculate; n=1 (default) is the usual vonNeumann entanglement entropy.
bonds (
None
 (iterable of) int) – Selects the bonds at which the entropy should be calculated.None
defaults torange(0, L+1)[self.nontrivial_bonds]
, i.e.,range(1, L)
for ‘finite’ MPS andrange(0, L)
for ‘infinite’ MPS.for_matrix_S (bool) – Switch calculate the entanglement entropy even if the _S are matrices. Since \(O(\chi^3)\) is expensive compared to the usual \(O(\chi)\), we raise an error by default.
 Returns:
entropies – Entanglement entropies for halfcuts. entropies[j] contains the entropy for a cut at bond
bonds[j]
, i.e. between sitesbonds[j]1
andbonds[j]
. For infinite systems with defaultbonds=None
, this means thatentropies[0]
will be a cut left of site 0 and is the one you should look at to e.g. study the scaling of the entanglement with chi or to extract the topological entanglement entropy  don’t take the average over bonds, in particular if you have 2D cylinders or ladders. On the contrary, for finite systems withbonds=None
, take the central value of the returned arrayentropies[len(entropies)//2)] == entropies[(L1)//2]
(and not justentropies[L//2]
) to extract the halfchain entanglement entropy. Return type:
1D ndarray
 entanglement_entropy_segment(segment=[0], first_site=None, n=1)[source]
Calculate entanglement entropy for general geometry of the bipartition.
This function is similar as
entanglement_entropy()
, but for more general geometry of the region A to be a segment of a few sites.This is achieved by explicitly calculating the reduced density matrix of A and thus works only for small segments. The alternative
entanglement_entropy_segment2()
might work for larger segments at small enough bond dimensions. Parameters:
segment (list of int) – Given a first site i, the region
A_i
is defined to be[i+j for j in segment]
.first_site (
None
 (iterable of) int) – Calculate the entropy for segments starting at these sites.None
defaults torange(Lsegment[1])
for finite or range(L) for infinite boundary conditions.n (int  float) – Selects which entropy to calculate; n=1 (default) is the usual vonNeumann entanglement entropy, otherwise the nth Renyi entropy.
 Returns:
entropies –
entropies[i]
contains the entropy for the the regionA_i
defined above. Return type:
1D ndarray
 entanglement_entropy_segment2(segment, n=1)[source]
Calculate entanglement entropy for general geometry of the bipartition.
This function is similar to
entanglement_entropy_segment()
, but allows more sites in segment. The trick is to exploit that for a pure state (which the MPS represents) and a bipartition into regions A and B, the entropy is the same in both regions, \(S(A) = S(B)\). Hence we can trace out the specified segment and obtain \(\rho_B = tr_A(rho)\), where A is the specified segment. The price is a huge computation cost of \(O(chi^6 d^{3x})\) where x is the number of physical legs not included into segment between min(segment) and max(segment). Parameters:
 Returns:
entropy – The entropy for the the region defined by the segment (or equivalently it’s complement).
 Return type:
 entanglement_spectrum(by_charge=False)[source]
return entanglement energy spectrum.
 Parameters:
by_charge (bool) – Whether we should sort the spectrum on each bond by the possible charges.
 Returns:
ent_spectrum – For each (nontrivial) bond the entanglement spectrum. If by_charge is
False
, return (for each bond) a sorted 1D ndarray with the convention \(S_i^2 = e^{\xi_i}\), where \(S_i\) labels a Schmidt value and \(\xi_i\) labels the entanglement ‘energy’ in the returned spectrum. If by_charge is True, return a a list of tuples(charge, sub_spectrum)
for each possible charge on that bond. Return type:
 get_rho_segment(segment)[source]
Return reduced density matrix for a segment.
Note that the dimension of rho_A scales exponentially in the length of the segment.
 probability_per_charge(bond=0)[source]
Return probabilities of charge value on the left of a given bond.
For example for particle number conservation, define \(N_b = sum_{i<b} n_i\) for a given bond b. This function returns the possible values of N_b as rows of charge_values, and for each row the probability that this combination occurs in the given state.
 Parameters:
bond (int) – The bond to be considered. The returned charges are summed on the left of this bond.
 Returns:
charge_values (2D array) – Columns correspond to the different charges in self.chinfo. Rows are the different charge fluctuations at this bond
probabilities (1D array) – For each row of charge_values the probability for these values of charge fluctuations.
 average_charge(bond=0)[source]
Return the average charge for the block on the left of a given bond.
For example for particle number conservation, define \(N_b = sum_{i<b} n_i\) for a given bond b. Then this function returns \(<\psi N_b \psi>\).
 charge_variance(bond=0)[source]
Return the charge variance on the left of a given bond.
For example for particle number conservation, define \(N_b = sum_{i<b} n_i\) for a given bond b. Then this function returns \(<\psi N_b^2 \psi>  (<\psi N_b \psi>)^2\).
 mutinf_two_site(max_range=None, n=1)[source]
Calculate the twosite mutual information \(I(i:j)\).
Calculates \(I(i:j) = S(i) + S(j)  S(i,j)\), where \(S(i)\) is the single site entropy on site \(i\) and \(S(i,j)\) the twosite entropy on sites \(i,j\).
 Parameters:
 Returns:
coords (2D array) – Coordinates for the mutinf array.
mutinf (1D array) –
mutinf[k]
is the mutual information \(I(i:j)\) between the sitesi, j = coords[k]
.
 overlap(other, charge_sector=None, ignore_form=False, **kwargs)[source]
Compute overlap
<selfother>
. Parameters:
other (
MPS
) – An MPS with the same physical sites.charge_sector (None  charges 
0
) – Selects the charge sector in which the dominant eigenvector of the TransferMatrix is.None
stands for all sectors,0
stands for the sector of zero charges. If a sector is given, it assumes the dominant eigenvector is in that charge sector.ignore_form (bool) – For UniformMPS only
False
is possible.**kwargs – Further keyword arguments given to
TransferMatrix.eigenvectors()
; only used for infinite boundary conditions.
 Returns:
overlap – The contraction
<selfother> * self.norm * other.norm
(i.e., taking into account thenorm
of both MPS). For an infinite MPS,<selfother>
is the overlap per unit cell, i.e., the largest eigenvalue of the TransferMatrix. Return type:
dtype.type
 sample_measurements(first_site=0, last_site=None, ops=None, rng=None, norm_tol=1e12)[source]
Sample measurement results in the computational basis.
This function samples projective measurements on a contiguous range of sites, tracing out the remaining sites.
Note that for infinite boundary conditions, the probability of sampling a set of sigmas is not
psi.overlap(MPS.from_product_state(sigmas, ...))^2
, because the latter would project to the set sigmas on each (translated) MPS unit cell, while this function is only projecting to them in a single MPS unit cell. Parameters:
first_site (int) – Take measurements on the sites in
range(first_site, last_site + 1)
. last_site defaults toL
 1.last_site (int) – Take measurements on the sites in
range(first_site, last_site + 1)
. last_site defaults toL
 1.ops (list of str) – If not None, sample in the eigenbasis of
self.sites[i].get_op(ops[(i  first_site) % len(ops)])
and directly return the corresponding eigenvalue in sigmas.rng (
numpy.random.Generator
) – The random number generator; if None, a new numpy.random.default_rng() is generated.norm_tol (float) – Tolerance
complex_amplitude (bool) – Do we return the complex amplitude (
True
) of the sampled bit string or the probability (False
), which is theabs(amplitude) ** 2
.
 Returns:
sigmas (list of int  list of float) – On each site the index of the local basis that was measured, as specified in the corresponding
Site
insites
. Note that this can change depending on whether/what charges you conserve! Explicitly specifying the measurement operator will avoid that issue.weight (complex) – The weight
sqrt(trace(psi><psisigmas...><sigmas...))
, i.e., the probability of measuringsigmas...>
isweight**2
. For a finite system where we sample all sites (i.e., the trace over the compliment of the sites is trivial), this is the actual overlap<sigmas...psi>
including the phase. If complex_amplitude is True, we returnweight**2
.
 norm_test(force=False)[source]
Check that self is in canonical form.
 Returns:
norm_error – For each site the norm error to the left and right. The error
norm_error[i, 0]
is defined as the normdifference between the following networks: theta[i]. s[i].    vs   theta*[i]. s[i].
Similarly,
norm_error[i, 1]
is the normdifference of: .theta[i] .s[i+1]    vs   .theta*[i] .s[i+1]
 Return type:
array, shape (L, 2)
 canonical_form(**kwargs)[source]
Bring self into canonical ‘B’ form, (re)calculate singular values; in place.
Simply calls
canonical_form_finite()
orcanonical_form_infinite1()
. Keyword arguments are passed on to the corresponding specialized versions.
 canonical_form_finite(renormalize=True, cutoff=0.0, envs_to_update=None)[source]
Bring a finite (or segment) MPS into canonical form; in place.
If any site is in
form
None
, it does not use any of the singular values S (for ‘finite’ boundary conditions, or only the very left S for ‘segment’ b.c.). If all sites have a form, it respects the form to ensure that one S is included per bond. The final state is always in rightcanonical ‘B’ form.Performs one sweep left to right doing QR decompositions, and one sweep right to left doing SVDs calculating the singular values.
 Parameters:
renormalize (bool) – Whether a change in the norm should be discarded or used to update
norm
. Note that even renormalize=True does not reset thenorm
to 1. To do that, you would rather have to setpsi.norm = 1
explicitly!cutoff (float  None) – Cutoff of singular values used in the SVDs.
envs_to_update (None  list of
MPSEnvironment
) – Clear the environments; for segment also update the left/rightmost LP/RP.
 Returns:
U_L, V_R – Only returned for
'segment'
boundary conditions. The unitaries defining the new left and right Schmidt states in terms of the old ones, with legs'vL', 'vR'
. Return type:
 correlation_length(target=1, tol_ev0=1e08, charge_sector=0)[source]
Calculate the correlation length by diagonalizing the transfer matrix.
Assumes that self is in canonical form.
Works only for infinite MPS, where the transfer matrix is a useful concept. Assuming a singlesite unit cell, any correlation function splits into \(C(A_i, B_j) = A'_i T^{ji1} B'_j\) with some parts left and right and the \(ji1\)th power of the transfer matrix in between. The largest eigenvalue is 1 (if self is properly normalized) and gives the dominant contribution of \(A'_i E_1 * 1^{ji1} * E_1^T B'_j = <A> <B>\), and the second largest one gives a contribution \(\propto \lambda_2^{ji1}\). Thus \(\lambda_2 = \exp(\frac{1}{\xi})\).
More general for a Lsite unit cell we get \(\lambda_2 = \exp(\frac{L}{\xi})\), where the xi is given in units of 1 lattice spacing in the MPS.
Warning
For a higherdimensional lattice (which the MPS class doesn’t know about), the correct unit is the lattice spacing in xdirection, and the correct formula is \(\lambda_2 = \exp(\frac{L_x}{\xi})\), where L_x is the number of lattice spacings in the infinite direction within the MPS unit cell, e.g. the number of “rings” of a cylinder in the MPS unit cell. To get to these units, divide the returned xi by the number of sites within a “ring”, for a lattice given in
N_sites_per_ring
. Parameters:
target (int) – We look for the target + 1 largest eigenvalues.
tol_ev0 (float  None) – Print warning if largest eigenvalue deviates from 1 by more than tol_ev0. If None, assume dominant eigenvector in 0chargesector to be 1 for nonzero charge_sector.
charge_sector (None  list of int 
0
 list of list of int) – Selects the charge sector (=list of int) in which we look for the dominant eigenvalue of the TransferMatrix.None
stands for all sectors,0
stands for the zerocharge sector. Defaults to0
, i.e., assumes the dominant eigenvector is in charge sector 0. If you pass a list of charge sectors (i.e. 2D array of int), this function returns target dominant eigenvalues in each of those sectors.return_charges (bool) – If True, return the charge sectors along with the eigenvalues.
 Returns:
xi (float  1D array) – If target = 1, return just the correlation length, otherwise an array of the target largest correlation lengths. It is measured in units of a single spacing between sites in the MPS language, see the warning above.
charge_sectors (list of charge sectors) – For each entry in xi the charge sector, i.e., qtotal of the dominant eigenvalue.
See also
correlation_length_charge_sectors
lists possible charge sectors.
 add(other, alpha, beta, cutoff=1e15)[source]
Return an MPS which represents
alphaself> + beta others>
.Works only for ‘finite’, ‘segment’ boundary conditions. For ‘segment’ boundary conditions, the virtual legs on the very left/right are assumed to correspond to each other (i.e. self and other have the same state outside of the considered segment). Takes into account
norm
. Parameters:
other (
MPS
) – Another MPS of the same length to be added with self.alpha (complex float) – Prefactors for self and other. We calculate
alpha * self> + beta * other>
beta (complex float) – Prefactors for self and other. We calculate
alpha * self> + beta * other>
cutoff (float  None) – Cutoff of singular values used in the SVDs.
 Returns:
sum – An MPS representing
alphaself> + beta other>
. Has same total charge as self. Return type:
MPS
 apply_local_op(i, op, unitary=None, renormalize=False, cutoff=1e13)[source]
Apply a local (one or multisite) operator to self. In place.
Note that this destroys the canonical form if the local operator is nonunitary. Therefore, this function calls
canonical_form()
if necessary.For infinite MPS, it applies the operator in parallel within each unit site, i.e., really it applies \(\prod_{u \in \mathbb{Z}} (\mathrm{op}_{i + u *L})\) where
L
is the number of sites in the MPS unit cell. Parameters:
i (int) – (Leftmost) index of the site(s) on which the operator should act.
op (str  npc.Array) – A physical operator acting on site i, with legs
'p', 'p*'
for a singlesite operator or with legs['p0', 'p1', ...], ['p0*', 'p1*', ...]
for an operator acting on n>=2 sites. Strings (like'Id', 'Sz'
) are translated into singlesite operators defined bysites
.unitary (None  bool) – Whether op is unitary, i.e., whether the canonical form is preserved (
True
) or whether we should callcanonical_form()
(False
).None
checks whethernorm(op dagger(op)  identity)
is smaller than cutoff.renormalize (bool) – Whether the final state should keep track of the norm (False, default), or the change of norm should be discarded (True).
cutoff (float) – Cutoff for singular values if op acts on more than one site (see
from_full()
). (And used as cutoff for a unspecified unitary.)understood_infinite (bool) – Raise a warning to make aware of A warning about infinite MPS. Set
understood_infinite=True
to suppress the warning.
 apply_product_op(ops, unitary=None, renormalize=False)[source]
Apply a (global) product of local onsite operators to self. In place.
Note that this destroys the canonical form if any local operator is nonunitary. Therefore, this function calls
canonical_form()
if necessary.The result is equivalent to the following loop, but more efficient by avoiding intermediate calls to
canonical_form()
inside the loop:for i, op in enumerate(ops): self.apply_local_op(i, op, unitary, renormalize)
Warning
This function does not automatically add JordanWigner strings! For correct handling of fermions, use
apply_local_term()
instead. Parameters:
ops ((list of) str  npc.Array) – List of onsite operators to apply on each site, with legs
'p', 'p*'
. Strings (like'Id', 'Sz'
) are translated into singlesite operators defined bysites
.unitary (None  bool) – Whether op is unitary, i.e., whether the canonical form is preserved (
True
) or whether we should callcanonical_form()
(False
).None
checks whethermax(norm(op dagger(op)  identity) for op in ops) < 1.e14
renormalize (bool) – Whether the final state should keep track of the norm (False, default), or the change of norm should be discarded (True).
 perturb(randomize_params=None, close_1=True, canonicalize=None)[source]
Locally perturb the state a little bit; in place.
 Parameters:
randomize_params (dict) – Parameters for the
RandomUnitaryEvolution
.close_1 (bool) – Select the default
RandomUnitaryEvolution.distribution_func
to be used, if close_1 is True, useU_close_1()
for complex andO_close_1()
for real MPS; for close_1 False useCUE()
orCRE()
, respectively.canonicalize (bool) – Wether to call psi.canonical_from in the end. Defaults to ``not close_1`.
 swap_sites(i, swap_op='auto', trunc_par=None)[source]
Swap the two neighboring sites i and i+1; in place.
Exchange two neighboring sites: form theta, ‘swap’ the physical legs and split with an svd. While the ‘swap’ is just a transposition/relabeling for bosons, one needs to be careful about the signs from JordanWigner strings for fermions.
 Parameters:
i (int) – Swap the two sites at positions i and i+1.
swap_op (
None
'auto', 'autoInv'
Array
) – The operator used to swap the physical legs of the twosite wave function theta. ForNone
, just transpose/relabel the legs. Alternative give an npcArray
which represents the full operator used for the swap. Should have legs['p0', 'p1', 'p0*', 'p1*']
with'p0', 'p1*'
contractible. For'auto'
we try to be smart about fermionic signs, see note below.trunc_par (dict) – Parameters for truncation, see
truncation
.
 Returns:
trunc_err – The error of the represented state introduced by the truncation after the swap.
 Return type:
TruncationError
Notes
For fermions, it’s crucial to use the correct swap_op. The swap_op is a twosite operator exchanging ‘p0’ and ‘p1’ legs. For bosons, this is really just a relabeling (done for
swap_op=None
). Alternatively, you can construct the operator explicitly like this:siteL, siteR = psi.sites[i], psi.sites[i+1] dL, dR = siteL.dim, siteR.dim legL, legR = siteL.leg, siteR.leg swap_op_dense = np.eye(dL*dR) swap_op = npc.Array.from_ndarray(swap_op_dense.reshape([dL, dR, dL, dR]), [legL, legR, legL.conj(), legR.conj()], labels=['p1', 'p0', 'p0*', 'p1*'])
However, for fermions we need to be very careful about the JordanWigner strings. Let’s derive how the operator should look like.
You can write a state as
\[\psi> = \sum_{[n_j]} \psi_{[n_j]} \prod_j (c^\dagger_j)^{n_j} vac>\]where
[n_j]
denotes a set of \(n_j \in [0, 1]\) for each physical site j and the product over j is taken in increasing order. Let \(P\) be the operator switchingi <> i+1
, with inverse \(P^\dagger\). Then:\[\begin{split}P \psi> = \sum_{[n_j]} \psi_{[n_i]} P \prod_j (c^\dagger_i)^{n_j} vac> \\ = \sum_{[n_j]} \psi_{[n_i]} P \prod_j (c^\dagger_i)^{n_j} vac>\end{split}\]When \(P\) acts on the product of \(c^\dagger_{i}\) operators, it commutes \((c^\dagger_i)^{n_i}\) with \((c^\dagger_{i+1})^{n_{i+1}}\). This gives a a sign \((1)^{n_i * n_{i+1}}\). We must hence include this sign in the swap operator. The n_i in the equations above is given by
JW_exponent
. This leads to the following swap operator used for fermions withswap_op='auto'
, suitable to just permute sites:siteL, siteR = psi.sites[i], psi.sites[i+1] dL, dR = siteL.dim, siteR.dim legL, legR = siteL.leg, siteR.leg n_i_n_j = np.outer(siteL.JW_exponent, siteR.JW_exponent).reshape(dL*dR) swap_op_dense = np.diag((1)**n_i_n_j) swap_op = npc.Array.from_ndarray(swap_op_dense.reshape([dL, dR, dL, dR]), [legL, legR, legL.conj(), legR.conj()], labels=['p1', 'p0', 'p0*', 'p1*'])
In some cases you might want to use a more complicated swap operator. As outlined in (the appendix of) [shapourian2017], a typical hamiltonian of the form \(H = t \sum_i c_i^\dagger c_{i+1} + h.c. + \text{density interaction}\) is invariant under a reflection \(R\) acting as \(R c^e_x R^\dagger = i c^o_{x}\) and \(R c^o_x R^\dagger = i c^e_{x}\) for even/odd fermion sites. The following code includes the factor of \(i\), or rather \(i\) since we have creation operators, into the swap operator and is used with
swap_op='autoInv'
:siteL, siteR = psi.sites[i], psi.sites[i+1] dL, dR = siteL.dim, siteR.dim legL, legR = siteL.leg, siteR.leg n_i = np.outer(siteL.JW_exponent, np.ones(dR)).reshape(dL*dR) n_j = np.outer(np.ones(dL), siteR.JW_exponent).reshape(dL*dR) swap_op_dense = np.diag((1)**(n_i * n_j) * (1.j)**n_i * (1.j)**n_j) swap_op = npc.Array.from_ndarray(swap_op_dense.reshape([dL, dR, dL, dR]), [legL, legR, legL.conj(), legR.conj()], labels=['p1', 'p0', 'p0*', 'p1*'])
 permute_sites(perm, swap_op='auto', trunc_par=None, verbose=None)[source]
Applies the permutation perm to the state; in place.
 Parameters:
perm (ndarray[ndim=1, int]) – The applied permutation, such that
psi.permute_sites(perm)[i] = psi[perm[i]]
(where[i]
indicates the ith site).swap_op (
None
'auto', 'autoInv'
Array
) – The operator used to swap the physical legs of a twosite wave function theta, seeswap_sites()
.trunc_par (dict) – Parameters for truncation, see
truncation
.
 Returns:
trunc_err – The error of the represented state introduced by the truncation after the swaps.
 Return type:
TruncationError
 compute_K(perm, swap_op='auto', trunc_par=None, canonicalize=1e06, verbose=None, expected_mean_k=0.0)[source]
Compute the momentum quantum numbers of the entanglement spectrum for 2D states.
Works for an infinite MPS living on a cylinder, infinitely long in x direction and with periodic boundary conditions in y directions. If the state is invariant under ‘rotations’ around the cylinder axis, one can find the momentum quantum numbers of it. (The rotation is nothing more than a translation in y.) This function permutes some sites (on a copy of self) to enact the rotation, and then finds the dominant eigenvector of the mixed transfer matrix to get the quantum numbers, along the lines of [pollmann2012], see also (the appendix and Fig. 11 in the arXiv version of) [cincio2013].
 Parameters:
perm (1D ndarray 
Lattice
) – Permutation to be applied to the physical indices, seepermute_sites()
. If a lattice is given, we use it to read out the lattice structure and shift each site by one latticevector in ydirection (assuming periodic boundary conditions). (If you have aCouplingModel
, give its lat attribute for this argument)swap_op (
None
'auto', 'autoInv'
Array
) – The operator used to swap the physical legs of a twosite wave function theta, seeswap_sites()
.trunc_par (dict) – Parameters for truncation, see
truncation
.canonicalize (float) – Check that self is in canonical form; call
canonical_form()
ifnorm_test()
yieldsnp.linalg.norm(self.norm_test()) > canonicalize
.expected_mean_k (float) – As explained in [cincio2013], the returned W is extracted as eigenvector of a mixed transfer matrix, and hence has an undefined phase. We fix the overall phase such that
sum(s[j]**2 exp(iK[j])) == np.sum(W) = np.exp(1.j*expected_mean_k)
.
 Returns:
U (
Array
) – Unitary representation of the applied permutation on left Schmidt states.W (ndarray) – 1D array of the form
S**2 exp(i K)
, where S are the Schmidt values on the left bond. You can usenp.abs()
andnp.angle()
to extract the (squared) Schmidt values S and momenta K from W.q (
LegCharge
) – LegCharge corresponding to W.ov (complex) – The eigenvalue of the mixed transfer matrix <psiTpsi> per
L
sites. An absolute value different smaller than 1 indicates that the state is not invariant under the permutation or that the truncation error trunc_err was too large!trunc_err (
TruncationError
) – The error of the represented state introduced by the truncation after swaps when performing the truncation.
 compress(options)[source]
Compress an MPS.
Options
 config MPS_compress
option summary By default (``None``) this feature is disabled. [...]
chi_list_reactivates_mixer (from Sweep) in IterativeSweeps.sweep
If True, the mixer is reset/reactivated each time the bond dimension growth [...]
Whether to combine legs into pipes. This combines the virtual and [...]
compression_method in MPS.compress
Mandatory. [...]
lanczos_params (from Sweep) in Sweep
Lanczos parameters as described in :cfg:config:`KrylovBased`.
max_hours (from IterativeSweeps) in DMRGEngine.stopping_criterion
If the DMRG took longer (measured in wallclock time), [...]
max_N_sites_per_ring (from Algorithm) in Algorithm
Threshold for raising errors on too many sites per ring. Default ``18``. [...]
max_sweeps (from IterativeSweeps) in DMRGEngine.stopping_criterion
Maximum number of sweeps to perform.
max_trunc_err (from IterativeSweeps) in IterativeSweeps
Threshold for raising errors on too large truncation errors. Default ``0.00 [...]
min_sweeps (from IterativeSweeps) in DMRGEngine.stopping_criterion
Minimum number of sweeps to perform.
Specifies which :class:`Mixer` to use, if any. [...]
mixer_params (from Sweep) in DMRGEngine.mixer_activate
Mixer parameters as described in :cfg:config:`Mixer`.
Number of sweeps to be performed without optimization to update the environment.
start_env_sites (from VariationalCompression) in VariationalCompression
Number of sites to contract for the initial LP/RP environment in case of in [...]
tol_theta_diff (from VariationalCompression) in VariationalCompression
Stop after less than `max_sweeps` sweeps if the 1site wave function change [...]
trunc_params in MPS.compress
Truncation parameters as described in :cfg:config:`truncation`.

option compression_method:
'SVD'  'variational'
Mandatory. Selects the method to be used for compression. For the SVD compression, trunc_params is the only other option used.
 option trunc_params: dict
Truncation parameters as described in
truncation
.

option compression_method:
 Returns:
max_trunc_err – The maximal truncation error of a twosite wave function.
 Return type:
TruncationError
 compress_svd(trunc_par)[source]
Compress self with a single sweep of SVDs; in place.
Perform a single rightsweep of QR/SVD without truncation, followed by a leftsweep with truncation, very much like
canonical_form_finite()
.Warning
In case of a strong compression, this does not find the optimal, global solution.
 Parameters:
trunc_par (dict) – Parameters for truncation, see
truncation
.
 outer_virtual_legs()[source]
Return the virtual legs on the left and right of the MPS.
 Returns:
vL, vR – Outermost virtual legs of the MPS. Preserved for a segment MPS even when calling
canonical_form()
on the segment. Return type:
 property L
Number of physical sites; for an iMPS the len of the MPS unit cell.
 apply_JW_string_left_of_virt_leg(theta, virt_leg_index, i)[source]
Apply signs on a virtual MPS leg equivalent to a JordanWigner string on the left.
If we conserve the (parity of the) total fermion particle number, each Schmidt state
alpha>
on a given bond (here left of site i) has a welldefined fermion parity number, so we can simply transformalpha> > (1)**parity[alpha] alpha>
. The corresponding signs(1)**parity[alpha]
are extracted bycharge_to_JW_signs()
.Warning
We may loose an overall, global minus sign in the case that some B tensors have nontrivial qtotal!
 apply_local_term(term, autoJW=True, i_offset=0, canonicalize=True, renormalize=False)[source]
Similar as
apply_local_op()
, but for a whole term acting on multiple sites.Note that this destroys the canonical form if the local operator is nonunitary. Therefore, this function calls
canonical_form()
by default. Parameters:
term (list of (str, int)) – List of tuples
op, i
where i is the MPS index of the site the operator named op acts on. The order inside term determines the order in which they act (in the mathematical convention: the last operator in term is rightmost, so it acts first on a ket).autoJW (bool) – If True (default), automatically insert Jordan Wigner strings for Fermions as needed.
i_offset (int) – Offset to be added to the siteindices in the term.
canonicalize (bool) – Whether to call
canonical_form()
with the renormalize argument in the end.renormalize (bool) – Whether a change in the norm should be discarded (True), or used to update
norm
(False). Ignored ifcanonicalize=False
.
 canonical_form_infinite1(renormalize=True, tol_xi=1000000.0)[source]
Bring an infinite MPS into canonical form; in place.
If any site is in
form
None
, it does not use any of the singular values S. If all sites have a form, it respects the form to ensure that one S is included per bond. The final state is always in rightcanonical ‘B’ form.Proceeds in three steps, namely 1) diagonalize right and left transfermatrix on a given bond to bring that bond into canonical form, and then 2) sweep right to left, and 3) left to right to bringing other bonds into canonical form.
 Parameters:
renormalize (bool) – Whether a change in the norm should be discarded or used to update
norm
. Note that even renormalize=True does not reset thenorm
to 1. To do that, you would rather have to setpsi.norm = 1
explicitly!tol_xi (float) – Raise an error if the correlation length is larger than that (which indicates a degenerate “cat” state, e.g., for spontaneous symmetry breaking).
 canonical_form_infinite2(renormalize=True, tol=1e15, arnoldi_params=None, cutoff=1e15)[source]
Convert infinite MPS to canonical form; in place.
Implementation following Algorithm 1,2 in [vanderstraeten2019].
 Parameters:
renormalize (bool) – Whether a change in the norm should be discarded or used to update
norm
. Note that even renormalize=True does not reset thenorm
to 1. To do that, you would rather have to setpsi.norm = 1
explicitly!tol (float) – Precision down to which the state should be in canonical form.
arnoldi_params (dict) – Parameters for
Arnoldi
.cutoff – Truncation cutoff for small singular values.
 correlation_function(ops1, ops2, sites1=None, sites2=None, opstr=None, str_on_first=True, hermitian=False, autoJW=True)[source]
Correlation function
<braop1_i op2_jket>
of single site operators, sandwiched between bra and ket. For examples the contraction for a twosite operator on site i would look like: .SB[i]B[i+1]...B[j].           op2   LP[i]    RP[j]   op1           .SB*[i]B*[i+1]...B*[j].
Onsite terms are taken in the order
<psi  op1 op2  psi>
. If opstr is given andstr_on_first=True
, it calculates: for i < j for i > j   .SB[i]B[i+1]... B[j]. .SB[j]B[j+1]... B[i].              opstr opstr op2   op2     LP[i]    RP[j] LP[j]    RP[i]   op1     opstr opstr op1              .SB*[i]B*[i+1]... B*[j]. .SB*[j]B*[j+1]... B*[i].
For
i==j
, no opstr is included. Forstr_on_first=False
, the opstr on sitemin(i, j)
is always left out. Strings (like'Id', 'Sz'
) in the arguments are translated into singlesite operators defined by theSite
on which they act. Each operator should have the two legs'p', 'p*'
.Warning
This function is only evaluating correlation functions by moving right, and hence can be inefficient if you try to vary the left end while fixing the right end. In that case, you might be better off (=faster evaluation) by using
term_correlation_function_left()
with a small for loop over the right indices. Parameters:
ops1 ((list of) {
Array
 str }) – First operator of the correlation function (acting after ops2). If a list is given,ops1[i]
acts on site i of the MPS. Note that even if a list is given, we still just evaluate twosite correlations!psi.correlation_function(['A','B'], ['C', 'D'])
evaluates<A_i C_j>
for even i and even j,<B_i C_j>
for even i and odd j,<B_i C_j>
for odd i and even j, and<B_i D_j>
for odd i and odd j.ops2 ((list of) {
Array
 str }) – Second operator of the correlation function (acting before ops1). If a list is given,ops2[j]
acts on site j of the MPS.sites1 (None  int  list of int) – List of site indices i; a single int is translated to
range(0, sites1)
.None
defaults to all sitesrange(0, L)
. Is sorted before use, i.e. the order is ignored.sites2 (None  int  list of int) – List of site indices; a single int is translated to
range(0, sites2)
.None
defaults to all sitesrange(0, L)
. Is sorted before use, i.e. the order is ignored.opstr (None  (list of) {
Array
 str }) – Ignored by default (None
). Operator(s) to be inserted betweenops1
andops2
. If less thanL
operators are given, we repeat them periodically. If given as a list,opstr[r]
is inserted at site r (independent of sites1 and sites2).str_on_first (bool) – Whether the opstr is included on the site
min(i, j)
. Note the order, which is chosen that way to handle fermionic JordanWigner strings correctly. (In other words: choosestr_on_first=True
for fermions!)hermitian (bool) – Optimization flag: if
sites1 == sites2
andOps1[i]^\dagger == Ops2[i]
(which is not checked explicitly!), the resultingC[x, y]
will be hermitian. We can use that to avoid calculations, sohermitian=True
will run faster.autoJW (bool) – Ignored if opstr is given. If True, autodetermine if a JordanWigner string is needed. Works only if exclusively strings were used for op1 and op2.
 Returns:
C – The correlation function
C[x, y] = <braops1[i] ops2[j]ket>
, whereops1[i]
acts on sitei=sites1[x]
andops2[j]
on sitej=sites2[y]
. If opstr is given, it gives (forstr_on_first=True
):  Fori < j
:C[x, y] = <braops1[i] prod_{i <= r < j} opstr[r] ops2[j]ket>
.  Fori > j
:C[x, y] = <braprod_{j <= r < i} opstr[r] ops1[i] ops2[j]ket>
.  Fori = j
:C[x, y] = <braops1[i] ops2[j]ket>
. The condition<= r
is replaced by a strict< r
, ifstr_on_first=False
.Warning
The
MPSEnvironment
variant of this method takes the accumulated MPSnorm
into account, which is nontrivial e.g. when you used apply_local_op with nonunitary operators.In contrast, the
MPS
variant of this method ignores the norm, i.e. returns the expectation value for the normalized state. Return type:
2D ndarray
Examples
Let’s prepare a state in alternating
+z>, +x>
states:>>> spin_half = tenpy.networks.site.SpinHalfSite(conserve=None) >>> p_state = ['up', [np.sqrt(0.5), np.sqrt(0.5)]]*3 >>> psi = tenpy.networks.mps.MPS.from_product_state([spin_half]*6, p_state, "infinite")
Default arguments calculate correlations for all i and j within the MPS unit cell. To evaluate the correlation function for a single i, you can use
sites1=[i]
. Alternatively, you can useterm_correlation_function_right()
(orterm_correlation_function_left()
):>>> psi.correlation_function("Sz", "Sx") array([[ 0. , 0.25, 0. , 0.25, 0. , 0.25], [ 0. , 0. , 0. , 0. , 0. , 0. ], [ 0. , 0.25, 0. , 0.25, 0. , 0.25], [ 0. , 0. , 0. , 0. , 0. , 0. ], [ 0. , 0.25, 0. , 0.25, 0. , 0.25], [ 0. , 0. , 0. , 0. , 0. , 0. ]]) >>> psi.correlation_function("Sz", "Sx", [0]) array([[ 0. , 0.25, 0. , 0.25, 0. , 0.25]]) >>> corr1 = psi.correlation_function("Sz", "Sx", [0], range(1, 10)) >>> corr2 = psi.term_correlation_function_right([("Sz", 0)], [("Sx", 0)], 0, range(1, 10)) >>> assert np.all(np.abs(corr2  corr1) < 1.e12)
For fermions, it autodetermines that/whether a Jordan Wigner string is needed:
>>> fermion = tenpy.networks.site.FermionSite(conserve='N') >>> p_state = ['empty', 'full'] * 3 >>> psi = tenpy.networks.mps.MPS.from_product_state([fermion]*6, p_state, "finite") >>> CdC = psi.correlation_function("Cd", "C") # optionally: use `hermitian=True` >>> bool(psi.correlation_function("C", "Cd")[1, 2] == CdC[2, 1]) True >>> bool(np.all(np.diag(CdC) == psi.expectation_value("Cd C"))) # "Cd C" is equivalent to "N" True
See also
expectation_value_term
for a single combination of i and j of
A_i B_j`
.term_correlation_function_right
for correlations between multisite terms, fix left term.
term_correlation_function_left
for correlations between multisite terms, fix right term.
 correlation_length_charge_sectors(drop_symmetric=True, include_0=True)[source]
Return possible charge_sector argument for
correlation_length()
.The
correlation_length()
is calculated from eigenvalues of the transfer matrix. The left/right eigenvectors correspond to contraction of the left/right parts of the transfermatrix in the network of thecorrelation_function()
. The charge_sector one can pass to thecorrelation_length()
(orTransferMatrix
, respectively) is the qtotal that eigenvector.Since bra and ket are identical for the
correlation_length()
, one can flip top and bottom and to an overall conjugate, and gets back to the same TransferMatrix, hence eigenvalues of a given eigenvector and it’s dagger (seen as a matrix with legs'vL', 'vL*'
) are identical. Since that flips the sign of all charges, we can conclude that the correlation length in a given charge sector and the negative charge sector are identical. The option drop_symmetric hence allows to only return charge sectors where the negative charge sector was not yet returned. Parameters:
drop_symmetric (bool) – See above.
 property dim
List of local physical dimensions.
 enlarge_chi(extra_legs, random_fct=<bound method RandomState.normal of RandomState(MT19937)>)[source]
Artificially enlarge the bond dimension by the specified extra legs/charges. In place.
First converts the MPS in B form. This function then fills up the ‘vR’ leg with zeros, and then groups physical and vR legs to fill up the ‘vL’ leg with orthogonal rows. In than way, we get an MPS with larger bond dimension, still in rightcanonical form (assuming no “overcomplete” charge block), representing the same state, with the additional singular values being exactly zero.
Note
You should probably choose the extra charges to be sensible, to expand into the space you are interested in, and not just into a random direction!
 Parameters:
extra_legs (list of {None,
LegCharge
, int}) – The extra charges to be added on the virtual legs, with qconj=+1. Length L +1 for finite, length L for infinite, with entry i left of site i. If an int is given, fill up with a single block of charges like the Schmidt state with highest weight. Note that this might force the resulting state to not be in strict “rightcanonical” B form if that charge block becomes overcomplete.random_fct – Function generating random entries to choose extra orthogonal rows in the B tensors. Should accept a size keyword for the shape, and return numpy arrays.
 Returns:
permutations – Permutation performed on each virtual leg, such that
new_S = concatenate(old_S, zeros)[perm]
. Return type:
list of 1D array  None
 expectation_value(ops, sites=None, axes=None)[source]
Expectation value
<braopsket>
of (nsite) operator(s).Calculates nsite expectation values of operators sandwiched between bra and ket. For examples the contraction for a twosite operator on site i would look like:
 .SB[i]B[i+1].           LP[i]  op  RP[i+1]           .SB*[i]B*[i+1].
Here, the B are taken from ket, the B* from bra. For MPS expectation values these are the same and LP/ RP are trivial.
 Parameters:
ops ((list of) {
Array
 str }) – The operators, for which the expectation value should be taken, All operators should all have the same number of legs (namely 2 n). If less thanlen(sites)
operators are given, we repeat them periodically. Strings (like'Id', 'Sz'
) are translated into singlesite operators defined bysites
.sites (list) – List of site indices. Expectation values are evaluated there. If
None
(default), the entire chain is taken (clipping for finite b.c.)axes (None  (list of str, list of str)) – Two lists of each n leg labels giving the physical legs of the operator used for contraction. The first n legs are contracted with conjugated B, the second n legs with the nonconjugated B.
None
defaults to(['p'], ['p*'])
for single site (n=1), or(['p0', 'p1', ... 'p{n1}'], ['p0*', 'p1*', .... 'p{n1}*'])
for n > 1.
 Returns:
exp_vals – Expectation values,
exp_vals[i] = <braops[i]ket>
, whereops[i]
acts on site(s)j, j+1, ..., j+{n1}
withj=sites[i]
.Warning
The
MPSEnvironment
variant of this method takes the accumulated MPSnorm
into account, which is nontrivial e.g. when you used apply_local_op with nonunitary operators.In contrast, the
MPS
variant of this method ignores the norm, i.e. returns the expectation value for the normalized state. Return type:
1D ndarray
Examples
Let’s prepare a state in alternating
+z>, +x>
states:>>> spin_half = tenpy.networks.site.SpinHalfSite(conserve=None) >>> p_state = ['up', [np.sqrt(0.5), np.sqrt(0.5)]]*3 >>> psi = tenpy.networks.mps.MPS.from_product_state([spin_half]*6, p_state)
One site examples (n=1):
>>> Sz = psi.expectation_value('Sz') >>> print(Sz) [0.5 0. 0.5 0. 0.5 0. ] >>> Sx = psi.expectation_value('Sx') >>> print(Sx) [ 0. 0.5 0. 0.5 0. 0.5] >>> print(psi.expectation_value(['Sz', 'Sx'])) [ 0.5 0.5 0.5 0.5 0.5 0.5] >>> print(psi.expectation_value('Sz', sites=[0, 3, 4])) [0.5 0. 0.5]
Two site example (n=2), assuming homogeneous sites:
>>> SzSx = npc.outer(psi.sites[0].Sz.replace_labels(['p', 'p*'], ['p0', 'p0*']), ... psi.sites[1].Sx.replace_labels(['p', 'p*'], ['p1', 'p1*'])) >>> print(psi.expectation_value(SzSx)) # note: len L1 for finite bc, or L for infinite [0.25 0. 0.25 0. 0.25]
Example measuring <psiSzSxpsi> on each second site, for inhomogeneous sites:
>>> SzSx_list = [npc.outer(psi.sites[i].Sz.replace_labels(['p', 'p*'], ['p0', 'p0*']), ... psi.sites[i+1].Sx.replace_labels(['p', 'p*'], ['p1', 'p1*'])) ... for i in range(0, psi.L1, 2)] >>> print(psi.expectation_value(SzSx_list, range(0, psi.L1, 2))) [0.25 0.25 0.25]
Expectation value with different bra and ket in an MPSEnvironment:
>>> spin_half = tenpy.networks.site.SpinHalfSite(conserve=None) >>> p2_state = [[np.sqrt(0.5), np.sqrt(0.5)], 'up']*3 >>> phi = tenpy.networks.mps.MPS.from_product_state([spin_half]*6, p2_state) >>> env = tenpy.networks.mps.MPSEnvironment(phi, psi) >>> Sz = env.expectation_value('Sz') >>> print(Sz) [0.0625 0.0625 0.0625 0.0625 0.0625 0.0625]
 expectation_value_multi_sites(operators, i0)[source]
Expectation value
<braop0_{i0}op1_{i0+1}...opN_{i0+N}ket>
.Calculates the expectation value of a tensor product of singlesite operators acting on different sites next to each other. In other words, evaluate the expectation value of a term
op0_i0 op1_{i0+1} op2_{i0+2} ...
, looking like this (with op short for operators, forlen(operators)=3
): .SB[i0]B[i0+1]B[i0+2]B[i0+3].         LP[i0] op[0] op[1] op[2] op[3] RP[i0+3]         .SB*[i0]B*[i0+1]B*[i0+2]B*[i0+3].
Warning
This function does not automatically add JordanWigner strings! For correct handling of fermions, use
expectation_value_term()
instead. Parameters:
 Returns:
exp_val – The expectation value of the tensorproduct of the given onsite operators,
<braoperators[0]_{i0} operators[1]_{i0+1} ... ket>
.Warning
The
MPSEnvironment
variant of this method takes the accumulated MPSnorm
into account, which is nontrivial e.g. when you used apply_local_op with nonunitary operators.In contrast, the
MPS
variant of this method ignores the norm, i.e. returns the expectation value for the normalized state. Return type:
float/complex
 expectation_value_term(term, autoJW=True)[source]
Expectation value
<braop_{i0}op_{i1}...op_{iN}ket>
.Calculates the expectation value of a tensor product of singlesite operators acting on different sites i0, i1, … (not necessarily next to each other). In other words, evaluate the expectation value of a term
op0_i0 op1_i1 op2_i2 ...
.For example the contraction of three onesite operators on sites i0, i1=i0+1, i2=i0+3 would look like:
 .SB[i0]B[i0+1]B[i0+2]B[i0+3].         LP[i0]op1 op2  op3 RP[i0+3]         .SB*[i0]B*[i0+1]B*[i0+2]B*[i0+3].
 Parameters:
term (list of (str, int)) – List of tuples
op, i
where i is the MPS index of the site the operator named op acts on. The order inside term determines the order in which they act (in the mathematical convention: the last operator in term is rightmost, so it acts first on a ket).autoJW (bool) – If True (default), automatically insert Jordan Wigner strings for Fermions as needed.
 Returns:
exp_val – The expectation value of the tensorproduct of the given onsite operators,
<braop_i0 op_i1 ... op_iN ket>
.Warning
The
MPSEnvironment
variant of this method takes the accumulated MPSnorm
into account, which is nontrivial e.g. when you used apply_local_op with nonunitary operators.In contrast, the
MPS
variant of this method ignores the norm, i.e. returns the expectation value for the normalized state. Return type:
float/complex
See also
correlation_function
efficient way to evaluate many correlation functions.
Examples
>>> a = psi.expectation_value_term([('Sx', 2), ('Sz', 4)]) >>> b = psi.expectation_value_term([('Sz', 4), ('Sx', 2)]) >>> c = psi.expectation_value_multi_sites(['Sz', 'Id', 'Sx'], i0=2) >>> assert a == b == c
 expectation_value_terms_sum(term_list)[source]
Calculate expectation values for a bunch of terms and sum them up.
This is equivalent to the following expression:
sum([self.expectation_value_term(term)*strength for term, strength in term_list])
However, for efficiency, the term_list is converted to an MPO and the expectation value of the MPO is evaluated.
 Parameters:
term_list (
TermList
) – The terms and prefactors (strength) to be summed up. Returns:
terms_sum (list of (complex) float) – Equivalent to the expression
sum([self.expectation_value_term(term)*strength for term, strength in term_list])
._mpo – Intermediate results: the generated MPO. For a finite MPS,
terms_sum = _mpo.expectation_value(self)
, for an infinite MPSterms_sum = _mpo.expectation_value(self) * self.L
See also
expectation_value_term
evaluates a single term.
tenpy.networks.mpo.MPO.expectation_value
expectation value density of an MPO.
 extract_enlarged_segment(psi_left, psi_right, first, last, add_unitcells=None, new_first_last=None, cutoff=1e14)[source]
Extract an enlarged segment from an initially smaller segment MPS.
With
extract_segment()
, we obtain a segment MPS on a small subsystem, or “segment” of the original system. Yet, such an MPS still has (limited) access to the outside of the segment through the Schmidt states to the left and right. While they are given by the original states from which we extracted the segment, we can still change local expectation values there by adjusting the weights of the Schmidt values.Given self as the segment MPS and the original background MPS containing the information about the Schmidt states, this function allows to define an MPS on an enlarged segment. This is particularly useful to evaluate expectation values outside of the original segment.
 Parameters:
psi_left (
MPS
) – Original background MPS to the left and right of self. May be the same if you’re not looking atTopologicalExcitations
.psi_right (
MPS
) – Original background MPS to the left and right of self. May be the same if you’re not looking atTopologicalExcitations
.first (int) – The first and last site of the segment that self is defined on, in the indexing of the original psi_left and psi_right.
last (int) – The first and last site of the segment that self is defined on, in the indexing of the original psi_left and psi_right.
add_unitcells (int  (int, int)) – How many unit cells (multiples of psi_left/right.L) to add to the left and right. A single value is used for both directions. Note that we also “complete” the unit cells to the left/right even for add_unitcells = 0. For initially finite MPS with nontrivial first, last, this yields the state on the full finite system.
new_first_last ((int, int)) – Alternatively, instead of specifying add_unit_cells, directly specify the
(new_first, new_last)
to be returned.cutoff (float) – Cutoff used for QR/SVDs in
canonical_form_finite()
.
 Returns:
psi_large_seg (
MPS
) – MPS in enlarged segment.new_first, new_last ((int, int)) – New first and last site of the enlarge segment used for psi_large_seg. Like first, last, this is indexed with respect to the “original” MPSs psi_left and psi_right.
 property finite
Distinguish MPS vs iMPS.
True for an MPS (
bc='finite', 'segment'
), False for an iMPS (bc='infinite'
).
 classmethod from_desired_bond_dimension(sites, chis, bc='finite', dtype=<class 'numpy.float64'>, permute=True, chargeL=None)[source]
Construct a matrix product state with given bond dimensions from random matrices (no charge conservation).
 Parameters:
sites (list of
Site
) – The sites defining the local Hilbert space.chis ((list of) {int}) – Desired bond dimensions. For a single int, the same bond dimension is used on every bond.
bc ({'infinite', 'finite'}) – MPS boundary conditions. See docstring of
MPS
. For ‘finite’ chi is capped to the maximum possible at each bond.dtype (type or string) – The data type of the array entries.
permute (bool) – The
Site
might permute the local basis states if charge conservation gets enabled. If permute is True (default), we permute the given p_state locally according to each site’sperm
. The p_state entries should then always be given as if conserve=None in the Site.chargeL (charges) – Leg charges at bond 0, which are purely conventional.
 Returns:
mps – An MPS with the desired bond dimension.
 Return type:
MPS
 classmethod from_product_mps_covering(mps_covering, index_map, bc='finite')[source]
Create an MPS as a product of (many) local mps covering all sites to be created.
This is a generalization of
from_singlets()
to allow arbitrary local, entangled states over multiple sites. Those local states are represented by MPS in mps_covering, such that each site in the final MPS gets it state from exactly one local MPS.For example to reproduce
from_singlets()
, you define L/2 local twosite mps in a singlet state, and use the pairs as index_map. (If you have lonely states not entangled into a singlet, add a trivial onesite MPS for them as well.) Indeed, if you look into the source code offrom_singlets()
, this is exactly what it does (at least since this method was implemented).More generally, you can easily initialize any kind of valence bond solid state, if you just initialize the corresponding local states and generate a corresponding index_map of the geometry of pairs, see the example below.
 Parameters:
 Returns:
psi – An MPS constructed as explained above.
 Return type:
MPS
Example
Say you have three local MPS with
mps_covering = [psi_A, psi_B, psi_C]
with A, B and C tensors on 3, 2, and 2 sites, respectively. Using theindex_map=[[0, 1, 3], [2, 5], [4, 6]]
would combine them as: A0A1A2 C0C1          B0B1           0 1 2 3 4 5 6
Using the
index_map=[[1, 2, 0], [3, 5], [6, 4]]
would rather combine them as: A2. C1C0        A0A1 B0B1           0 1 2 3 4 5 6
As another example, let’s generalize
from_singlets()
to “spinfull” fermions represented by the (spinless!)FermionSite
with an extra index for the spin, here u=0,1 on a 2D square lattice.>>> ferm = FermionSite(conserve='N') >>> lat = MultiSpeciesLattice(Square(4, 2, None), [ferm]*2, ['up', 'down']) >>> ferm_up_down = MPS.from_product_state([ferm]*4, ['full', 'empty', 'empty', 'full']) >>> ferm_down_up = MPS.from_product_state([ferm]*4, ['empty', 'full', 'full', 'empty']) >>> ferm_singlet = ferm_up_down.add(ferm_down_up, 0.5**0.5, 0.5**0.5) >>> index_map = [[(x, y, 0), (x, y, 1), (x+1, y, 0), (x+1, y, 1)] ... for (x, y) in [(0, 0), (0, 1), (2, 0), (2, 1)]] >>> index_map = [[lat.lat2mps_idx(x_y_u) for x_y_u in pairs] for pairs in index_map] >>> psi = MPS.from_product_mps_covering([ferm_singlet]*4, index_map)
This will generate a singlet valence bold solid (VBS) state looking like this:
 xx xx   xx xx
 classmethod from_random_unitary_evolution(sites, chi, p_state, bc='finite', dtype=<class 'numpy.float64'>, permute=True, form='B', chargeL=None)[source]
Construct a matrix product state by evolving a product state with random unitaries.
 Parameters:
sites (list of
Site
) – The sites defining the local Hilbert space.chi (int) – The target bond dimension. For finite systems, we evolve until the maximum bond dimension reaches this value. For infinite systems, we evolve until all bond dimensions have reached this value.
p_state (list of {int  str  1D array}) – Defines the product state to start from; one entry for each site of the MPS. An entry of str type is translated to an int with the help of
state_labels()
. An entry of int type represents the physical index of the state to be used. An entry which is a 1D array defines the complete wavefunction on that site; this allows to make a (local) superposition.bc ({'infinite', 'finite', 'segment'}) – MPS boundary conditions. See docstring of
MPS
.dtype (type or string) – The data type of the array entries.
permute (bool) – The
Site
might permute the local basis states if charge conservation gets enabled. If permute is True (default), we permute the given p_state locally according to each site’sperm
. The p_state entries should then always be given as if conserve=None in the Site.form ((list of) {
'B'  'A'  'C'  'G'  None
 tuple(float, float)}) – Defines the canonical form. See module docstring. A single choice holds for all of the entries.chargeL (charges) – Leg charges at bond 0, which are purely conventional.
 static get_charge_tree_for_given_charge_sector(sites: list, charge_sector: tuple)[source]
Construct the chargetree for a given charge sector.
This is a tree of possible charges for each site s.t. the MPS lies in the given
charge_sector
. Parameters:
 Returns:
charge_tree – A tree of possible charges (at the sites) for the desired
charge_sector
. I.e. consider the state \(\ket{++}\). The desired charge tree for the sector(0,)
is[{(0,)}, {(1,), (1,)}, {(0,)}]
. Return type:
 get_op(op_list, i)[source]
Given a list of operators, select the one corresponding to site i.
 Parameters:
 Returns:
op (npc.array) – One of the entries in op_list, not copied.
needs_JW (bool) – If the operator needs a JW string. Always
False
if the entry ofop_list
is an array.
 property nontrivial_bonds
Slice of the nontrivial bond indices, depending on
self.bc
.
 overlap_translate_finite(psi, shift=1)[source]
Contract
<selfT^Npsi>
for translation T with finite, periodic boundaries.Looks like this for
shift=1
, with the open virtual legs contracted in the end:B[L1] Th[0]  B[1]  B[2]  ..... B[L2]       Th*[0] B*[1] B*[2] B*[3] ..... B*[L1]
An alternative to calling this method would be to call
permute_sites()
followed byoverlap()
. Note that permute_sites uses truncation on the way, though, which could severely affect the precision especially for general (nonlocal) permutations while this function contracts everything exactly (possibly at higher numerical cost). Parameters:
psi (
MPS
) – MPS to take overlap with.shift (int) – Translation by how many sites. Note that for large shift, the contraction is \(O(\chi^4)\) compared to DMRG etc scaling as \(O(\chi^3)\).
 Returns:
self_Tn_psi – Contraction of
<selfT^Npsi>
. Return type:
See also
permute_sites
Allows more general permutations of the sites.
overlap
Directly the overlap between two MPS without translation.
roll_mps_unit_cell
Effectively applies
T^shift
on infinite MPS.
 classmethod project_onto_charge_sector(sites, p_state_list, charge_sector, dtype=<class 'float'>, **kwargs)[source]
Generates an MPS from a product state list which is projected onto a given charge sector.
 Parameters:
sites (list of
Site
) – The sites defining the local Hilbert space. The sites should conserve some charge, otherwise projecting onto a charge sector is meaningless.p_state_list (list  np.ndarray) – list defining the product state out of which to project
charge_sector (tuple of int) – The charge sector corresponding to the conserved charge of the
sites
dtype (type)
 Returns:
projected_MPS
 Return type:
 term_correlation_function_left(term_L, term_R, i_L=None, j_R=0, autoJW=True, opstr=None)[source]
Correlation function between (multisite) terms, moving the left term, fix right term.
Same as
term_correlation_function_right()
, but vary index i of the left term instead of the j of the right term.
 term_correlation_function_right(term_L, term_R, i_L=0, j_R=None, autoJW=True, opstr=None)[source]
Correlation function between (multisite) terms, moving the right term, fix left term.
For
term_L = [('A', 0), ('B', 1)]
andterm_R = [('C', 0), ('D', 1)]
, calculate the correlation function \(A_{i+0} B_{i+1} C_{j+0} D_{j+1}\) for fixed i and varying j according to i_L/j_R. The terms may not overlap. For fermions, the order of the terms is following the usual mathematical convention, where term_R acts first on a physical ket.Warning
This function assumes that bra and ket are normalized, i.e. for MPSEnvironment. Thus you may want to take into account
MPS.norm
of both bra and ket. Parameters:
term_L (list of (str, int)) – Each a term representing a sum of operators on different sites, e.g.,
[('Sz', 0), ('Sz', 1)]
or[('Cd', 0), ('C', 1)]
.term_R (list of (str, int)) – Each a term representing a sum of operators on different sites, e.g.,
[('Sz', 0), ('Sz', 1)]
or[('Cd', 0), ('C', 1)]
.i_L (int) – Offset added to the indices of term_L.
j_R (list of int  None) – List of offsets to be added to the indices of term_R. Is sorted before use, i.e. the order is ignored. For finite MPS, None defaults to
range(j0, L)
, where j0 is chosen such that term_R starts one site right of the term_L. For infinite MPS, None defaults torange(L, 11*L, L)
, i.e., one term per MPS unit cell for a distance of up to 10 unit cells.autoJW (bool) – Whether to automatically take care of JordanWigner strings.
opstr (str) – Force an intermediate operator string to used inbetween the terms. Can only be used in combination with
autoJW=False
.
 Returns:
corrs – Values of the correlation function, one for each entry in the list j_R.
Warning
The
MPSEnvironment
variant of this method takes the accumulated MPSnorm
into account, which is nontrivial e.g. when you used apply_local_op with nonunitary operators.In contrast, the
MPS
variant of this method ignores the norm, i.e. returns the expectation value for the normalized state. Return type:
1D array
See also
correlation_function
varying both i and j at once.
term_list_correlation_function_right
generalization to sums of terms on the left/right.
 term_list_correlation_function_right(term_list_L, term_list_R, i_L=0, j_R=None, autoJW=True, opstr=None)[source]
Correlation function between sums of multisite terms, moving the right sum of term.
Generalization of
term_correlation_function_right()
to the case where term_list_L and term_R are sums of terms. This function calculates<braterm_list_L[i_L] term_list_R[j]ket> for j in j_R
.Assumes that overall terms with an odd number of operators requiring a JordanWigner string don’t contribute. (In systems conserving the fermionic particle number (parity), this is true.)
 Parameters:
term_list_L (
TermList
) – Each a TermList representing the sum of terms to be applied.term_list_R (
TermList
) – Each a TermList representing the sum of terms to be applied.i_L (int) – Offset added to all the indices of term_list_L.
j_R (list of int  None) – List of offsets to be added to the indices of term_list_R. Is sorted before use, i.e. the order is ignored. For finite MPS, None defaults to
range(j0, L)
, where j0 is chosen such that term_R starts one site right of the term_L. For infinite MPS, None defaults torange(L, 11*L, L)
, i.e., one term per MPS unit cell for a distance of up to 10 unit cells.autoJW (bool) – Whether to automatically take care of JordanWigner strings.
opstr (str) – Force an intermediate operator string to be used inbetween the terms. (Even used within the term_list_L/R for terms with smallerthan maximal support.) Can only be used in combination with
autoJW=False
.
 Returns:
corrs – Values of the correlation function, one for each entry in the list j_R.
Warning
The
MPSEnvironment
variant of this method takes the accumulated MPSnorm
into account, which is nontrivial e.g. when you used apply_local_op with nonunitary operators.In contrast, the
MPS
variant of this method ignores the norm, i.e. returns the expectation value for the normalized state. Return type:
1D array
See also
term_correlation_function_right
version for a single term in both term_list_L/R.